East Carbon Coke Ovens Formula & Images for Sale: Compare Carbon Coke Grades by Specification

East Carbon Coke Ovens Formula & Images for Sale: Compare Carbon Coke Grades by Specification

9 November 2026
East Carbon Coke Ovens Formula & Images for Sale: Compare Carbon Coke Grades by Specification

Compare East Carbon Coke Ovens Formula & Images for Sale with Carbon Coke Allotropes by fixed carbon, ash, volatile matter, sulfur, moisture, and particle size. The East Carbon range gives three separate grades with distinct limits, while Carbon Coke Allotropes presents one specification and a different sizing range. Use the chemistry and feed size that match your furnace or foundry process before requesting a quote.

Illustration: East Carbon Coke Ovens Formula & Images for Sale: Compare Carbon Coke Grades by Specification
Illustration for reference; see the product page for actual photos and specifications.
01

East Carbon Coke Ovens Formula & Images for Sale: GPC, CPC, and CAC

02

Carbon Coke Allotropes & Differenza Carbone

What the two offerings cover

The East Carbon Coke Ovens Formula & Images for Sale range gives three carbon materials to compare: Graphitized Petroleum Coke (GPC), Calcined Petroleum Coke (CPC), and Calcined Anthracite Coal (CAC). The Carbon Coke Allotropes range presents one carbon coke specification with its own particle-size bands.

That difference matters at the first purchasing step. You can screen the East Carbon range by grade, then match its chemistry to the process. Carbon Coke Allotropes provides a narrower specification for buyers who already have a target chemistry and size range.

Formula comparison

The figures below use the same units and limit style where the two offerings provide comparable values.

CriterionEast Carbon GPCEast Carbon CPCEast Carbon CACCarbon Coke Allotropes
Fixed carbon98.5 to 99.5%98.0 to 99.0%94.0 to 96.0%98.5 to 99.5%
Ash content≤0.5%≤0.8%≤3.0%≤0.3%
Volatile matter≤0.5%≤0.8%≤1.5%≤0.5%
Sulfur≤0.05%≤0.3%≤0.5%≤0.03%
Moisture≤0.3%≤0.5%≤1.0%≤0.5%

GPC and Carbon Coke Allotropes share the same fixed-carbon range and volatile-matter limit. Their ash, sulfur, and moisture limits differ: Carbon Coke Allotropes lists lower maximum ash and sulfur, while East Carbon GPC lists lower maximum moisture. Those are useful checkpoints when your melt chemistry has tight impurity or moisture limits.

East Carbon CPC sits below GPC on the stated fixed-carbon range and has higher maximum ash, volatile matter, sulfur, and moisture. East Carbon CAC has the broadest maximum limits in each of those four impurity or moisture measures and the lowest fixed-carbon range among the three East Carbon grades. A foundry or steelmaking team should identify the required chemistry before choosing between the three grades.

Particle size and process fit

Particle size is a separate purchasing decision from formula. East Carbon GPC, CPC, and CAC are available in 0 to 1 mm and 1 to 3 mm bands, with 3 to 5 mm also listed for all three. CPC also includes a 5 to 8 mm band. Carbon Coke Allotropes lists 0 to 0.5 mm, 0.5 to 5 mm, and 5 to 25 mm bands.

The ranges do not use identical cut points. A buyer changing from one offering to the other should check the dosing system, screens, and storage handling against the selected band. For example, a process set up for the 5 to 25 mm Carbon Coke Allotropes fraction should not be treated as automatically equivalent to the 3 to 5 mm East Carbon fraction.

Which specification fits the purchase?

Choose among East Carbon GPC, CPC, and CAC when you need three chemistry profiles and several shared particle-size bands in one range. GPC is the East Carbon option with the highest fixed-carbon range and lowest listed maximum moisture. CPC adds the 5 to 8 mm size band. CAC covers the lowest fixed-carbon range and the largest listed maximum values for ash, volatile matter, sulfur, and moisture.

Choose Carbon Coke Allotropes when its 98.5 to 99.5% fixed-carbon range, ≤0.3% ash, ≤0.5% volatile matter, ≤0.03% sulfur, and ≤0.5% moisture limits match your process. Its 5 to 25 mm size band may suit a feed system designed for coarser material, while its 0 to 0.5 mm band uses a finer lower cut than the East Carbon 0 to 1 mm band.

We can discuss a custom formula or particle size for the East Carbon range, which is useful when your furnace recipe does not fit the listed bands. Ask for the grade, chemistry target, and size band together so the quotation addresses one defined material.

Questions to settle before ordering

Which East Carbon grade has the lowest sulfur limit?

East Carbon GPC has the lowest sulfur limit at ≤0.05%. CPC is listed at ≤0.3%, and CAC at ≤0.5%. If sulfur control is the first screening condition, start with GPC and then check its fixed-carbon, ash, moisture, and particle-size fit. Send the required grade and target size together when requesting a quotation.

Does Carbon Coke Allotropes include a coarser size than the East Carbon grades?

Yes. Carbon Coke Allotropes lists a 5 to 25 mm band. East Carbon lists 3 to 5 mm for GPC, CPC, and CAC, with CPC also listed at 5 to 8 mm. If your charging equipment is built around larger pieces, send the hopper opening, screen cut, and desired fraction so we can assess the closest listed option.

Which East Carbon grade has the lowest moisture limit?

GPC has the lowest East Carbon moisture limit at ≤0.3%. CPC is listed at ≤0.5%, and CAC at ≤1.0%. This distinction matters when incoming material is weighed, stored, or metered by mass. Include your moisture limit and storage conditions in the inquiry so we can align the requested grade with the way you receive it.

Send the chemistry and size target

East Carbon GPC suits a purchase screened around the highest East Carbon fixed-carbon range and lowest East Carbon moisture limit. Carbon Coke Allotropes suits a request that matches its 98.5 to 99.5% fixed-carbon and 5 to 25 mm options. Send your target chemistry, particle-size band, and monthly quantity to Ding An Heng New Material Technology Co., Ltd. for a defined quotation.

The company

Ding An Heng New Material Technology Co., Ltd.

Ding An Heng New Material Technology Co., Ltd is a large-scale graphite production enterprise in China with more than 20 years of production experience. We mainly produce Graphite Electrode, Graphitized Petroleum Coke GPC, Calcined Petroleum Coke CPC, Calcined Anthracite Coal CAC & other recarburizer. After years of dedicated development, our products are sold to whole China market and meanwhile exported to Southeast Asia, Middle East, Europe and Africa with good reputation.…

About Us ↗Visit company website ↗
The Choice of Graphite, The Core of Quality
Graphite power, lighting up the future industry
contact us
graphite powder suppliers
graphite powder suppliers

Conductive Core

Carrying high temperature and efficient power

Your Email Address...

submit
graphite powder manufacturers
graphite electrode supplier

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

  • captcha