Choose GC-100 for varnish and polish residue removal, GP-200 for fine surface polishing, or GV-300 for a protective graphite coating after cleaning. Match the grade to the treatment stage, operating conditions, material demand, and storage period.
GC-100, GP-200, and GV-300 serve different stages of surface treatment. The right choice depends on whether you need to remove residue, refine a surface, or add a protective barrier.
Match the grade to the job
GC-100 Cleaner suits die-cast mold cleaning and other work centered on varnish or polish residue removal. Its natural flake graphite base contains ≥99%C, with a particle size of D90 ≤ 15 μm and a pH of 7.0 to 7.5 in a 10% solution. Its application temperature is 15°C to 55°C, with coverage of 12 to 18 m²/kg. Choose it when cleaning is the first requirement.
GP-200 Polish fits precision tool restoration and surface polishing. It uses synthetic graphite with alumina, has a particle size of D90 ≤ 5 μm, and has a pH of 6.8 to 7.2 in a 10% solution. Its application temperature is 10°C to 45°C, and its coverage is 8 to 12 m²/kg. Select it when fine particle size and polishing are the main requirements.
GV-300 Varnish suits a post-cleaning protective barrier coating. It uses expanded graphite resin, has a particle size of D90 ≤ 20 μm, and has a pH of 7.0 to 7.8 in a 10% solution. Its application temperature is 5°C to 80°C, with coverage of 6 to 10 m²/kg. Choose it when the process calls for a graphite varnish after cleaning and polishing.
Choose the grade by treatment stage, then compare working conditions, coverage, and unopened shelf life. Discuss a custom formulation when substrate or regulatory requirements call for one.
Check the working conditions
Temperature can determine which grade fits the application point: GC-100 covers 15°C to 55°C, GP-200 covers 10°C to 45°C, and GV-300 covers 5°C to 80°C. Compare the full working range at your application point with the selected grade before requesting a quotation.
The surface objective also sets the order of choice. Residue removal points to GC-100, precision polishing points to GP-200, and a protective coating after those steps points to GV-300. If your workflow includes several stages, assign each grade to its specific task instead of treating cleaner, polish, and varnish as interchangeable materials.
Compare material planning parameters
| Grade | Base material | Particle size (D90) | pH (10% solution) | Application temperature | Coverage rate | Shelf life unopened |
|---|---|---|---|---|---|---|
| GC-100 Cleaner | Natural flake graphite (≥99%C) | ≤ 15 μm | 7.0 to 7.5 | 15°C to 55°C | 12 to 18 m²/kg | 24 months |
| GP-200 Polish | Synthetic graphite + alumina | ≤ 5 μm | 6.8 to 7.2 | 10°C to 45°C | 8 to 12 m²/kg | 18 months |
| GV-300 Varnish | Expanded graphite resin | ≤ 20 μm | 7.0 to 7.8 | 5°C to 80°C | 6 to 10 m²/kg | 24 months |
Coverage helps estimate material demand, while unopened shelf life matters when inventory will remain in storage before use. Compare the selected grade with your treated area and purchasing cycle, then include those details in the inquiry.
What to weigh
Treatment stage · remove residue, polish a surface, or apply a protective coating
Process fit · compare pH, temperature range, particle size, and coverage
Inventory planning · check unopened shelf life against the purchasing cycle
Your shortlist
GC-100 Cleaner · varnish and polish residue removal
GP-200 Polish · precision tool restoration and surface polishing
GV-300 Varnish · post-cleaning protective barrier coating
Prepare the product inquiry
Custom formulations are available for specific substrate or regulatory requirements, and the minimum order quantity is 500 kg. State whether you need GC-100, GP-200, or GV-300, then include the substrate, application temperature, target surface stage, estimated area, and storage period. Review the Polish Varnish Cleaner & Graphite Compound Tools product page before preparing the request.
The company
Ding An Heng New Material Technology Co., Ltd.
Ding An Heng New Material Technology Co., Ltd is a large-scale graphite production enterprise in China with more than 20 years of production experience. We mainly produce Graphite Electrode, Graphitized Petroleum Coke GPC, Calcined Petroleum Coke CPC, Calcined Anthracite Coal CAC & other recarburizer. After years of dedicated development, our products are sold to whole China market and meanwhile exported to Southeast Asia, Middle East, Europe and Africa with good reputation.…
About Us ↗Visit company website ↗

